Laser Cutter Types

Before investing in a high quality laser cutter machine it is important to understand its main uses and functions. It is also essential to get the best laser cutter machine according to what you aim at producing. The more you know about the machines the more likely you will to reach the expected results.

Fiber laser cutting machine

The fiber laser cutting machine is the fastest way to cut thin metal sheets. Especially suited for applications that do not require superior surface quality at the cutting edges, it can be used to cut thin to medium materials.

Increased energy efficiency

In laser cutter and its applications, energy makes up 5% to 7% of the total cost per part. The co2 laser cutter machines also include additional components for energy savings. To create the most efficient configuration for you, you should get advice and discuss all options with a specialist. The more you use these machines the more you will save cash, especially if in the long run.

The safety factor

Fiber laser cutting machine uses a wavelength of 1 μ and therefore require the application of very strict safety criteria. Machines must be in a completely isolated environment to reduce the operator’s ability to influence the process and prolong downtime in the event of a problem. On the other hand, since they only use 10 μ, the CO2 lasers allow the operator to approach and restart the cutting process as soon as possible in case of an incident.

C02 laser cutting

The co2 laser cutter is ideal for processes that require a high degree of accuracy. The surfaces produced are superior to those created by fiber laser cutting. And although it does not rival milling, it is much faster and therefore much more profitable. Able to cut materials from the thinnest to the thickest, it is also faster than cutting with fiber in materials with a thickness exceeding a certain value.

Keep your maintenance costs down

The co2 laser cutter is quite complex and thus require maintenance, especially of turbines and mirrors. Given the inherent costs, make sure you choose a machine designed for maximum reliability. For example, some machines require only maintenance work performed at extremely spaced intervals. A manufacturer also guarantees the turbine for 24,000 hours.

Automate to increase productivity

Supported by charging robots, a CO2 laser machine can work continuously without interruption. More efficient and economical than a fiber machine in this type of application, this results in a low

Lower costs per piece

70% of the costs of laser equipment are derived from the initial contract and not from everyday operating expenses. In financial terms, co2 laser cutter offers enormous advantages over fiber-cutting machines in applications involving complex shapes and extremely demanding levels of accuracy and repeatability. This is due to the fact that achieving identical results with a fiber cutting machine would entail costly upgrades, such as adding rigidity and setting up an optimized linear motor, which would ultimately make this option too expensive. Click here for more information: http://www.excellence-electric.com/cost-effective-cutting-using-power-fiber-lasers/